Surgical MVPs 2H26
2H26 Surgical Rotary
Bone reduction
to passive fit
The rotary set for a bone reduction guide and a passive fit bridge. Five steps from the guide plane to a frame that seats without tension, built from FGSL surgical diamonds, FGSL surgical carbides, Lindemann bone cutters and our tissue trimmers. Every instrument is a stock DentPS item, packed and shipped from Sarasota.
Pack tiers and a free cutter
Applied in the cart, automatic. The free packs ship in the same box as the order: nothing to mail in, no rebate form.
Buy 7, get 3 free
Buy 12, get 6 free
Buy 12, get 3 free
Mix and match inside the same pack size across every item on this page. Free packs are always the cheapest in the group, and the tiers and the code combine, so a qualifying order can carry both. Packs only: the tiers count pack quantities, not single instruments.
The protocol, step by step
Five steps on the sheet, seven instrument groups. Every item adds straight to the cart at its live store price and pack size.
01Reduce to the guide plane and open access
Cross-cut fissure flat-cuts to the planed reference plane and the plain fissure troughs between sites. Surgical length keeps the handpiece clear of the flap.
FGSL.C557.010
1.0 mm · 3.7 cut · 10/pk or 100/pk
FGSL.C701.012
1.2 mm · 3.7 cut · 10/pk or 100/pk
02Section and extract under the guide
Lindemann geometry cuts tooth and bone without grabbing: controlled sectioning of roots and any segment the reduction leaves behind. Same bur in FGSL, HP and RASL.
FGSL.C162A.016
1.6 mm Lindemann · FGSL, HP, RASL · 5/pk
FGSL.C161.016
1.6 mm bone cutter · 5/pk
03Contour the ridge (alveoplasty)
Round and oval cross-cut carbides blend high and low spots after bulk reduction, leaving a continuous contour for the flap to drape over.
04Shorten cylinders, then finish the frame
Mounted sintered diamond trims titanium and plastic cylinders square; cross-cut carbide refines margins, relief and the intaglio surface.
MDD910D-190
19 mm disc · HP · medium
MDD910D-220
22 mm disc · HP · medium
UC251E/060
6.0 mm · 14.7 mm
UC079E/031
3.1 mm · tight access
FGSL surgical diamonds
25 mm total bur length for deep access through a reduction guide. Round, modify chamfer and end cutter heads in super coarse, coarse and medium, 5 per pack.
FGSL.D801.010
1.0 mm round · 25 mm length
FGSL.D801.012
1.2 mm round · 25 mm length
FGSL.D801.014
1.4 mm round · 25 mm length
FGSL.D801.016
1.6 mm round · 25 mm length
FGSL.D801.018
1.8 mm round · 25 mm length
FGSL.D801.023
2.3 mm round · 25 mm length
FGSL.D801.029
2.9 mm round · 25 mm length
FGSL.D879K.016
1.6 mm modify chamfer · 25 mm length
FGSL.D10839.016
1.6 mm end cutter · 25 mm length
FGSL.D859.010
1.0 mm · 25 mm length
FGSL surgical carbides
Surgical-length carbide cutters: cross-cut fissure to flat the plane, bone and surgical shapes to section and contour, flame and needle for margins. 10 per pack, 100 per pack on request.
Straight fissure
FGSL.C556.009
0.9 mm · 3.7 cut
FGSL.C557.010
1.0 mm · 3.7 cutFGSL.C558.012
1.2 mm · 3.7 cut
FGSL.C559.014
1.4 mm · 3.7 cut
FGSL.C560.016
1.6 mm · 3.7 cut
Taper fissure
FGSL.C170.010
1.0 mm
FGSL.C171.012
1.2 mm
FGSL.C700.010
1.0 mm
FGSL.C701.012
1.2 mm · 3.7 cutFGSL.C702.016
1.6 mm
FGSL.C702L.016
1.6 mm · long
FGSL.C703.021
2.1 mm
Round end fissure
Round
FGSL.C1/4.005
0.5 mm
FGSL.C1/2.007
0.7 mm
FGSL.C1.008
0.8 mm
FGSL.C2.010
1.0 mm
FGSL.C3.012
1.2 mm
FGSL.C4.014
1.4 mm
FGSL.C6.018
1.8 mm
FGSL.C8.023
2.3 mm
Bone and surgical
FGSL.C161.016
1.6 mmFGSL.C267.016
1.6 mm
FGSL.C1702.016
1.6 mm
FGSL.C1703.021
2.1 mm
FGSL.C1906.018
1.8 mm
FGSL.C2057.010
1.0 mm
Flame and needle
Lindemann bone cutters
One Lindemann geometry in three shanks: FGSL for surgical-length FG, HP for latch, RASL for RA. 5 per pack.
FGSL / HP / RASL.C162A.016
1.6 mm Lindemann · 5/pkTissue trimmers
Ceramic tissue trimmer for soft tissue and fine interproximal work without tearing the flap.
CT1
Ceramic tissue trimmer · FG
Sequence notes. Irrigate throughout and keep the bur moving; light intermittent pressure on bone. Contour by palpation after bulk reduction. Not affiliated with, sponsored by, or endorsed by any guided-surgery or reduction-guide service or manufacturer: the instrument selections here are DentPS’s own, built to sit alongside a guided reduction workflow. Prices, pack sizes and images read live from the store listing; item numbers are the join key.
2H26 surgical rotary
Stock, packed
and shipped from Sarasota
Every instrument on this sheet is a live DentPS item. Need the set kitted for a case, or a size we do not list? Ask and we match it exactly.
