Collection: HSCE.0470BK
The Higher
Aesthetics
HSC Edge.
One complete laboratory kit to contour, shape, and polish lithium disilicate to a true ceramic luster — without the micro-fractures. Three HSC diamonds, two Turbo HSC polishers, and two dedicated discs, sequenced as a single finishing protocol.
The Protocol
Contour · Shape ·
Polish.
Lithium disilicate fails when finishing introduces heat or micro-fractures. The HSC Edge is sequenced so each instrument leaves the right surface for the next — coarser grits never chase finer grits.
Contour
HSC diamonds establish external anatomy and marginal precision on green-state and pressed lithium disilicate — controlled reduction, reduced chatter.
Shape
The mini diamond disc separates and refines interproximal contours on CAD/CAM HSC restorations; the coarse sintered disc trims high-strength ceramic blocks.
Polish
Turbo HSC flexible polishers take the surface from pre-polish to a stable, stain-resistant ceramic luster — first mauve (medium), then grey for high-gloss.
Kit Contents
Seven instruments,
one protocol.
Every instrument is tuned to the same finishing sequence — so every restoration leaves the lab finished to the same standard.
Parallel Double-Striped Medium Chamfer
Controlled reduction with reduced chatter. The double-stripe medium grit balances stock removal against surface quality for pressed and CAD/CAM lithium disilicate.
Standard Parallel Chamfer — HP Shank
The reference chamfer bur on an HP shank. Run in sequence with the double-striped medium chamfer to define margins and axial walls before pressing high-strength ceramics.
Tapered Double-Striped Medium Chamfer
Tapered access for occlusal and interproximal contouring where a parallel bur cannot reach.
Flexible Polisher — Medium (Mauve)
The pre-polish stage. Removes diamond striations and brings the surface to a uniform satin finish before high-gloss.
Flexible Polisher — Grey
The high-gloss stage. Delivers the final ceramic luster without paste — compatible with lithium disilicate and zirconia.
Separation & Contouring Disc
Ultra-thin, for precise separation and contouring of CAD/CAM HSC restorations at the contact and the margin.
High-Strength Ceramic Trimming Disc
Aggressive stock removal — slices through and trims high-strength ceramics (zirconia, lithium disilicate) where diamond grit would load or glaze.
Bur Block Layout
3 ROWS × 7 HOLES · 21 SLOTSThe kit block is drilled for 21 friction-locked holes across three rows — back (1–7), middle (8–14), and front (15–21). Each instrument seats in its dedicated slot, so the finishing sequence is always one reach away.
Material Matrix
Validated across
the ceramic range.
Technical Specs
The kit at
a glance.
Equip your lab
Finish every restoration
to the same standard.
The Higher Aesthetics HSC Edge — one kit, the full lithium disilicate protocol. Available now through DentPS.
